Follow us on : youtube googleplus rss Linked In facebook twitter
Monarch Logo

Monarch Industrial Products (I) Pvt Ltd

(An ISO 9001 : 2015, ISO 14001 : 2015 & OHSAS 18001 : 2007 Certified Company)
Call Toll-Free : 1800-425-1070

Product Group
Surface Protective Coatings Catalogue

Follow Us:

Surface Protective Coatings

Surface Protective Coatings

Concrete is today’s main building material. Modern infrastructure, road and bridge construction would be inconceivable without concrete as would skyscrapers and industrial buildings. Concrete is a versatile building material used especially in civil engineering in combination with steel. Concrete and reinforced concrete are building materials that have significantly changed construction. Despite concrete’s durability, serious concrete damage that endangers a building’s existence frequently occurs. The main cause of concrete damage is reinforcement steel corrosion due to environmental influences.

The fresh concrete is highly alkaline which passivates the reinforcement steel. However when the concrete structures remain vulnerable to external atmosphere for 24 hours a day, 7 days a week in all operational environments, the steel’s passivation layer (protective layer) begin to dissolve due to harmful substances that penetrate into the building material by means of moisture. The water penetrates into the concrete as deep as the steel reinforcing rods or steel mesh, depends on the porosity, to cause their rusting. The pitting corrosion starts in the steel, damaging the structural integrity.

Since the volume of the corrosion products is much higher than that of the steel, it occupy a volume equal to six times that of original steel. The formation of rust products will lead to cracking, delamination and spalling of the cover concrete when expensive stress exceeds the tensile strength of the concrete, and reduction of steel reinforcing cross section may lead to structural failure. This accelerates the corrosion process by providing as easy access for the water and chlorides to reach the steel. When corrosion products are deposited, they induce tensile stresses on the surrounding concrete, which cause cracking to occur.

The absorption of harmful substances is usually the outcome of contact between concrete material and water as capillary action transports the water into the concrete. This contributes to the following forms of damage. Chemical corrosion, Cracks by swelling and shrinkage, Efflorescence, Lime leaching and salt damage by hydration, Dirt pick-up, Rust stains, Fungus, moss, lichen and algae growth. The protective layer against water uptake is the paramount importance.

The Buildings hence need Surface Protective Coatings to protect them from causing reinforcement corrosion due to ingress of chlorides, chemicals, road salts, freeze/thaw cycles or other contaminants through water and oxygen. Monarch’s MonoGuard Surface Protective Coatings provide reliable protection for concrete structure aim is to preserve the value of old and new buildings & civil infrastructure to protect them against weathering and structural damage. It is the known fact that repairing the concrete structures is up to ten times more expensive than preventive measures. The coatings protect the concrete in the most efficient way and the building fabric remains intact as a result. The concrete thus is less sceptible against physical, chemical, UV radiation, thermal stress and microbiological attack especially in road, bridge and building construction.

Salient Features of Surface Protective Coatings

Tank Paint


  • Durable in all climatic conditions.
  • Excellent barrier to carbon dioxide, chloride ions, sulphates, oxygen and water
  • Improves the resistance of concrete to many industrial chemical
  • Attractive- available in a range of colours.
  • Antifungal- resistant to fungal attack
  • Non yellowing :Will not yellow on exposure to UV rays.
  • Chemical resistant :Excellent resistance to most industrial chemicals, acids, solvents etc.
  • Hygienic : Seamless surface, easily cleaned
  • Excellent adhesion : Bonds well with both steel and concrete substrates
  • Excellent flexibility to withstand higher temperatures


  • Chemical/petrochemical plants
  • Refineries
  • Power stations
  • Nuclear facilities
  • Industrial facades
  • Wood and paper industry
  • Food industry
  • LNG
  • methanol and ethylene plants
  • Natural gas storage vessels/tank farms
  • Bioenergy/environmental technology
  • Turbine insulation
  • Cement works
  • Sea water desalination
  • Fertiliser factories
  • Waste incineration
  • Trace heating
  • Underground tank
  • Overhead tank
  • Reservoir
  • chemical plants
  • Cooling Towers

Application Demo

Application Procedure

  • -

Product Range

Epoxy Primers for Concrete Surfaces

Fast curing solvent free epoxy primer (MonoBond FP)

Fast curing solvent free epoxy primer.


Solvent Free Epoxy Primer (MonoBond SFP)

Solvent Free Epoxy Primer.


Solventless Epoxy Primer (MonoBond EP)

Solventless Epoxy Primer.


Solvented Epoxy Primer (MonoBond SEP)

Solvented Epoxy Primer.

Surface / Moisture tolerant Epoxy Primers

Moisture tolerant Epoxy Primer for Damp Metal & Concrete Surfaces (MonoBond MICP)

Moisture tolerant Epoxy Primer for Damp Metal & Concrete Surfaces.


Moisture Insensitive Epoxy Primer for Metal Surfaces (MonoBond MIP)

Moisture Insensitive Epoxy Primer for Metal Surfaces.

Epoxy based Protective Coatings

Solvent Based Epoxy Coating (MonoGuard EMG)

Solvent Based Epoxy Coating.


Solvent Free Epoxy Coating (MonoGuard ECG)

100% solids, Solvent Free Epoxy Coating.


Chemical Resistant Coating (MonoGuard SCG)

Chemical Resistant Phenolic based Coating.


Food Grade & solvent Coatings (MonoGuard FEC)

Food Grade & solvent free, epoxy Lining compound for food stuffs.


Moisture Compatible Epoxy Coatings (MonoGuard MEC)

Moisture Compatible / tolerant Epoxy Coatings.


Coal Tar Epoxy Coating (MonoGuard BCT)

Coal Tar Epoxy Protective Coating.

Polyurethane based Protective Coatings

Polyurethane Coating (MonoGuard PMG)

2K Aliphatic Polyurethane Coating for UV / Chemical Resistance.

Polyurethane Coating

Polyurethane Protective Coating (MonoGuard PCG)

2K High build Aliphatic Polyurethane Protective Coating.


Anti-graffiti Maintenance Free coating (MonoGuard PAG)

Anti-graffiti ,Stain-Free, Maintenance - Free coating.

Polyester based FRP Chemical Resistance Coatings and Linings

Sandable Polyester Putty (MonoGuard PP)

Sandable Polyester Putty.


Epoxy based FRP Coating (MonoGuard FEP)

Chemical Resistance Epoxy based FRP Coating.


Polyester based FRP Coating (MonoGuard FCR)

Chemical Resistance Polyester based FRP Coating.


Glass Fibre Mat (MonoGuard FFM)

Glass Fibre 600/450 GSM Mat.


Glass Fibre Surface Mat (MonoGuard SM)

Glass Fibre Surface Mat.


Polyester Resin based Pigment (MonoGuard FFP)

Polyester Resin based Pigment.

Vinyl based FRP Chemical Resistance Coatings and Linings

Vinyl Ester based Primer. (MonoGuard VEP)

Vinyl Ester based Primer.


Vinyl Ester based Glass Flake Coatings for Corrosion Protection. (MonoGuard VGFC)

Vinyl Ester based Glass Flake Coatings for Corrosion Protection..


High Temperture Resistance Vinyl Ester based Glass Flake Coatings(MonoGuard HTVEC)

High Temperture Resistance Vinyl Ester based Glass Flake Coatings for Corrosion Protection till 175°C dry temperature.

Aliphatic Acrylate based Protective & Decorative Coatings

MonoGuard PDC - Primer

Penetrating silane / siloxane primer for Acrylic based systems.


Protective and decorative coatings (MonoGuard PDC)

Protective and decorative coatings for concrete and masonary surface.

Acrylic based Protective coating for concrete structures

Polymer Protective Coating (MonoGuard RG)

Single Component Acrylic Polymer Protective Coating.