The down-time, shut down, profit loss, energy decline, safety hazards pose major threat to many Industries. Monarch's SavesPast range of Metal Reclamation Putties
offers wide range of products and services during routine and unexpected maintenance to solve the maintenance issues that arise from machinery, process
equipment & structural’s break-downs and failures across wide spectrum of Industries. These 2 component epoxy putties containing Resin and Hardener which
after mixing hardens to a firm metal like material, well adhering to almost any kind of surface. It rebuilds worn-out surface to the original specifications, in most of the
cases in less than 2 hours down-time saving huge inventory / replacement costs. The surface of the base substrate is not altered as in case of welding and no
thermal stresses are induced during repair. The cured mass can be painted, sanded, machined, tapped, ground, filed or drilled.
Salient Features:
- Rehabilitation instead of replacement
- Safety enhancement as no dangers of hot work
- In-situ application - do jobs right on production line
- Fast and economical repairs
- Ease in application procedures
- Permanent solutions to countless applications
|
- Increased reliability
- Reduce the cost of plant shutdown
- Match metal color
- Excellent resistance to aggressive chemicals
- High compressive strength for mechanical applications.
|
General Purpose
SavesPast TP
Multi-Purpose Reclamation Putty for precision critical jobs - Titanium Putty
A two component paste, engineering grade system based on a ferro-silicon filled epoxy system. The non-
rusting putty extensively used for repairing and rebuilding worn-out surfaces in machinery & equipment
and precision critical applications in less down-time.
SavesPast SP
Extended Pot Life repair applications - Steel Putty
A two component paste, general purpose repair system based on a steel filled epoxy system. The metal
putty is extensively used for extended working life repairing and rebuilding worn-out surfaces in
machinery & equipment.
SavesPast CP
Rebuilding putty for tough wear and abrasion resistance - Ceramic Putty
A two component paste general purpose ceramic-filled epoxy system .The ceramic putty is used to repair
high wear areas against sliding abrasion /erosion of processing equipment’s , interfacing metallic, low-
friction surfaces and extends wear life. It is ideally suited to be over coated with XtraLife CEC- 21202
(Ceramic Brushable) to ensure long lasting performance.
SavesPast CCP
Ceramic Carbide Putty against fine particle abrasion - Ceramic Carbide Putty
2 pack non-sagging, trowel applied epoxy putty is extensively used for repairing and protecting surfaces against abrasive attack. SavesPast CCP is containing maximum load of high alumina ceramic beads and
silicon carbide designed to give maximum abrasion resistance. The product offers maximum performance against entrained particulate abrasion, constant vibration, and wearing surface abrasion.
SavesPast CAP
Aluminum Based Silicon Carbide Putty against Impact Wear - Ceramic Aluminum Putty
2 pack non-sagging, trowel applied epoxy putty is extensively used for repairing and protecting surfaces
against impact attack. SavesPast CAP is containing maximum load of high aluminum ceramic beads and
silicon carbide designed to give maximum impact resistance. The product offers maximum performance
against entrained particulate impact, constant vibration, and wearing surface impact.
Special Purpose
SavesPast AP
Repair of Aluminum parts/castings - Alumininum Putty
A two component paste, based on a aluminum powder filled epoxy system. The non-rusting, non-
magnetic dependable inert putty extensively used for fairing, repair or patching of aluminum castings
and equipment where aluminum finish is desired.
SavesPast BP
Repair of Bronze parts / castings - Bronze Putty
A two component paste, based on a bronze powder filled epoxy system. The non-rusting, non-magnetic
dependable inert putty extensively used for fairing, repair, filling or patching of bronze castings and
equipment where bronze finish is desired and where brazing is undesirable or impossible.
SavesPast CUP
Repair of Copper parts/castings - Copper Putty
A two component paste, based on a copper powder filled epoxy system. The non-rusting, non magnetic
dependable inert putty extensively used for fairing, repair, filling or patching of copper castings and
equipment where copper finish is desired.
SavesPast SSP
Repair of Stainless Steel parts/castings and food processing equipments- Stainless Steel Putty
A two component paste, based on a stainless steel powder filled epoxy system. The non-rusting, non-
magnetic dependable inert putty extensively used for fairing, repair, filling or patching of stainless steel
fittings, components, castings and equipment especially at hygiene conscious facilities or chemical
processing applications.
High Temperature Putties Till 230°C Dry Application
SavesPast HTCP
Rebuilding putty for tough wear and high temperature resistance till 230 ̊C dry application
- High Temp.Ceramic Putty
A two component paste general purpose ceramic-filled epoxy system based on high temperature resistance
special resin .The ceramic putty is used to repair high wear areas against sliding abrasion /erosion of
processing equipment’s , interfacing metallic, low-friction surfaces and extends wear life for high
temperature service conditions. Ideally used for scrubbers, cyclones, dust collectors, and fan housings. The
high temperature putty requires post-curing for Optimum performance and temperature resistance
SavesPast HTTP
Multi-Purpose Reclamation Putty for high temperature resistance till 230 ̊ C dry application
- High Temp. Titanium Putty
A two component paste, engineering grade system based on a ferro-silicon filled epoxy system on high
temperature resistance special resin. The non-rusting putty extensively used for repairing and rebuilding
worn-out surfaces in machinery& equipment and precision critical applications in less down-time for high
temperature service conditions. The high temperature putty requires post-curing for proper performance
and temperature resistance
Under Pressure Leak Arrest Putties
Zero-Down-Time ETP
Rapid Setting putty for sealing active leakages - Express Titanium Putty
A rapidly solidifying repair system containing Resin and quick setting Hardener which after mixing sets within
5 minutes. The fast curing putty is oil surface tolerant and moisture surface tolerant. In general the metal
surfaces are susceptible to the leakages due to corrosion or faulty weld or porous structures.
Zero-Down- Time ETP suites for use in emergency applications to cold seal and stems the active, potential
and catastrophic fluid and oil leakages, in-situ, without the need to take process offline and make expensive
drain down procedures, in the cases such as transformer oil, SF6 gas from circuit breakers and switch gear,
Porcelain and Steel CT bushings, water, leaking pipes, leaking tanks, leaking radiator fins, unions, couplings,
fastener assemblies and drain plugs.
Besides sealing the live leakages the emergency putty can be used for repair applications like Scored
Hydraulic rams, Stripped threads, Holed casings etc.,
Zero-Down-Time UWP
Under water repair putty for chronically wet/damp environments - Under Water Putty
The moisture surface tolerant epoxy putty makes effective repairs to metal, concrete, wood surfaces in wet
and damp environments. The product is used extensively for chronically underwater repairs, underwater
patching, filling cracks, leaks, holes and the applications where dampness is present such as boat hulls,
tanks, pipelines, valves, pumps, concrete vessels etc. The putty is unaffected by chlorinated or salt water and
is ideal for plumbing, irrigation and marine where applications are underwater.
Range of Products
Home 