The precise zero-shrinkage alignment of Machinery and Equipment is critical for effective transfer and distribution of static compressive dynamic and impact loads. Both the concrete surface and the machine base have irregularities and hence these machinery and equipment cannot be placed directly onto finished concrete surfaces. The performance of a grout under a machine or equipment base depends on the properties of the grout like stability, stiffness, volume change, strength and flowability.
MonoGrout's wide range of cementitious and epoxy grouts systems are used for grouting of voids and duct beneath the load bearing units, concrete and the base plates. The anchoring systems are used to install permanent and removable critical fixings.
The key feature are: Rehabilitation instead of replacement, Safety enhancement as no dangers of hot work, In-situ application - do jobs right on production line, fast and economical repairs, ease in application procedures, permanent solutions to countless applications, increased reliability, reduce the cost of plant shutdown, match metal color, excellent resistance to aggressive chemicals, high compressive strength for mechanical applications.
MonGrout GP , precision grouting is supplied as a ready to use dry powder. The addition of a controlled amount of clean water produces a free flowing, non‐shrink grout for gap thicknesses up to 100mm. MonGrout GP is a blend of Portland cement, graded fillers and chemical additives which impart controlled expansion in the plastic state whilst minimising water demand. The low water demand ensures high early strength. The graded fillers are designed to assist uniform mixing and produce a consistent grout...
MonoGrout MC is a 100% solids, two component inert filled casting compound developed for use as a chocking or grouting material. MonoGrout MC is designed to withstand severe marine and industrial environments involving a high degree of both physical and thermal shock. The compound is non‐shrinking and has very high impact and compressive strength.and long term durability.
MonoGrout HEG 10 is a solvent free epoxy resin grout designed for grouting of gap widths of 0.25 to 10mm. It is an all liquid system consisting of base and hardener. The components are supplied in the correct mix proportions designed for whole pack mixing on site. Provides a free flowing grout, for use where physical properties and chemical resistance of the hardened grout are of utmost importance. It is suitable for a wide range of heavy duty applications like underplate grouting, steelworks, refineries chemical plants Rebar Grouting etc.
MonoGrout FEG 120 is Solvent free epoxy grout formulation which does not require any additional aggregate .It is supplied as a three component system consisting of base, hardener and specially graded aggregate. The components are supplied in the correct mix proportions designed for whole pack mixing on sites to be added. MonoGrout FEG 120 is for use in situations where heavy dynamic or mobile loads are encountered. The gap between a base plate and substrate needs to be filled and the structural load be uniformly distributed.
MonoGrout FEG 300 is a low exotherm material which is particularly suitable where long working time is needed; for large gaps (up to 300 mm) or for grouting at high ambient temperatures (up to 55°C) MonoGrout FEG 300 is a three component system consisting of base resin, liquid hardener and specially graded inert fillers Suitable for use where heavy, dynamic or mobile loads are encountered. Particularly well suited to applications where long working time and/or low exotherm properties are required....
MonoGrout MT is a solvent-free, 3-component, pourable grout, based on a combination of high strength epoxy resins and specially graded aggregates. After mixing, it provides a free flowing self-levelling epoxy grout. can be applied on concrete, stone, mortar, steel, aluminium, asbestos cement, wood, polyester and epoxy as a self-levelling, flowable epoxy mortar....
MonoGrout EGA is a plasticised expanding grout admixture is supplied as a powder. The material is a combination of a plasticising agent and a gas producing expansion medium. The plasticising agent allows the use of a reduced water/ cement ratio with consequent increased strengths and durability. The expansive medium counteracts the natural settlement and plastic shrinkage of the grout and aids stability and cohesion.
in the proportions supplied to form a strong permanent bond and seal in cracks in concrete and masonry. MonoGrout LV is designed to be injected into cracks using suitable resin injection equipment.
MonoGrout PUF 1K is Single pack low viscosity Polyurethane foam Grouting. It is a Hydrophilic waterstops that can be applied for the concrete underground structure where leakage occurs quite often, Inserted polyurethane resin reacts with water and forms Open Cell Foam rapidly. By reacting with water, this foam becomes high elastic such like rubber and also becomes high adhesive foam at time passes. Especially, it’s reactivity with water is outstanding therefore it is very effective to apply on a spot where there is liquidity caused by contraction, expansion, vibration or underground structure with lots of water.
MonoGrout PUF 2K is two part liquid a MDI ( Methylene Diphenyl isocyanate) Polyurethane prepolymer & Accelerator base a two part liquid polyurethane foam grouting., when mixed in the proportions supplied it reacts rapidly with water producing a relatively stiff & inert polyurethane foam. It will displace and stop flowing water, forming a tough flexible foam, firmly bonded to the concrete surface. MonoGrout PUF2K will used for quick temporary closing & sealing of water bearing cracks, cavities and leaks under hydrostatic pressure of concrete surfaces.
PolyAnchor S is a two‐part, fast setting, free flowing polyester resin anchoring grout, consisting of a specially formulated liquid resin and hardener. It is designed specifically for anchoring bolts and dowels in concrete, rock, brick and masonry. PolyAnchor S is used where the difference between the holediameter and bar diameter is < 24mm.PolyAnchor S is Always perform pull out testing to determine the performance in each situation. PolyAnchor S resists oil, grease, fats, mild acids, and alkalies, fresh and salt water.
PolyAnchor L is a two‐part, fast setting, free flowing polyester resin anchoring grout, consisting of a specially formulated liquid resin and hardener. It is designed specifically for anchoring bolts and dowels in concrete, rock, brick and masonry. PolyAnchor L is used where the difference between the hole diameter and bar diameter is Between 25to 51 mm. PolyAnchor L is Always perform pull out testing to determine the performance in each situation. PolyAnchor L resists oil, grease, fats, mild acids, and alkalis, fresh and salt water.
PolyAnchor EPI is a two‐part, fast setting, free flowing polyester resin anchoring grout, consisting of a specially formulated liquid resin and hardener. It is designed specifically for anchoring bolts and dowels in concrete, rock, brick and masonry. PolyAnchor L is used where the difference between the hole diameter and bar diameter is Between 25to 51 mm. PolyAnchor L is Always perform pull out testing to determine the performance in each situation. PolyAnchor L resists oil, grease, fats, mild acids, and alkalis, fresh and salt water.