Description

Cementitious Crystalline Concrete Waterproofing

MonoProof MD is a surface applied, unique chemical treatment for the waterproofing, protection and repair of concrete. It consists of grey Portland cement, specially treated quartz sand and fillers, and a compound of active chemicals. MonoProof MD can be applied as a second coat to reinforce MonoProof Conc, or applied by itself to damp-proof the exterior of foundation walls. Applied as a second coat, MonoProof MD chemically reinforcesMonoProof Conc where two coats are required and produces a harder finish. Where damp-proofing is required, a single coat of MonoProof MD may be used as an alternative to a spray/tar emulsion.

*Condition Apply

Shop Now Online

MonoProof MD - Cementitious Crystalline Concrete Waterproofing


Description:-

MonoProof MD is a surface applied, unique chemical treatment for the waterproofing, protection and repair of concrete. It consists of grey Portland cement, specially treated quartz sand and fillers, and a compound of active chemicals MonoProof MD can be applied as a second coat to reinforce MonoProof Conc, or applied by itself to damp-proof the exterior of foundation walls. Applied as a second coat, MonoProof MD chemically reinforces MonoProof Conc where two coats are required and produces a harder finish. Where damp-proofing is required, a single coat of Modified may be used as an alternative to a spray/tar emulsion. MonoProof MD prevents the penetration of water and other liquids from any direction by causing a catalytic reaction that produces a non-soluble crystalline formation within the pores and capillary tracts of concrete and cement-based materials. MonoProof MD is a particularly suitable slurry for filling air bubbles and voids in weak and porous surfaces.

Product Features

  • Resists extreme hydrostatic pressure
  • Becomes an integral part of the substrate
  • Allows concrete to breathe
  • Resistant to aggressive chemicals
  • Non-toxic
  • Does not require dry weather or a dry surface
  • Cannot puncture, tear or come apart at the seams
  • No costly surface priming or leveling prior to application
  • Does not require sealing, lapping and finishing of seams at corners, edges or between membranes
  • Can be applied to the positive or the negative side of the concrete surface Suitable for potable water contact
  • Does not require protection during backfilling or during placement of steel, wire mesh or other materials
  • Less costly to apply than most other methods
  • Not subject to deterioration
  • Permanent Abrasion resistant–No additional protective coating is required for roof subjected to foot traffic.
  • Ease of application – can be applied by brush & roller easily.
  • Light weight – does not add extra weight over the roof

Elastomeric cementitious waterproofing Application:

`
  • Reservoirs
  • Sewage and Water Treatment Plants
  • Underground Vaults
  • Secondary Containment Structures
  • Foundations
  • Tunnels and Subway Systems
  • Foundations
  • Parking Structural
  • Swimming Pools
  • Basements
  • Retaining walls
  • Storage tanks
  • Basement retaining walls in hollow concrete block work
  • Underground car parks

Application Video

Data Sheet

Net Weight / Pack Size 25 kg
Cost / kg ₹.81 (Inclusive of All Taxes)
Indicative Material Cost / sq.mtr ₹.73
Indicative Material Cost / sq.mtr ₹.7
Coverage 28 Sq.m / 25 kg / Coat *
Consumption 0.89 Kg/Sq.Mtr/Coat
Application Procedure Please refer the TDS (Technical Data Sheet) for Application Instruction

Download Supporting Document


Company Profile-MonoProof

Company Profile (B&I)

Download Now

Catalogue-MonoProof

Product Catalogue

Download Now

Approvals-MonoProof

Product-Approvals

Download Now

Warranty-MonoProof

Product Warranty

Download Now

FAQ - MonoProof

Frequently Asked Questions

Download Now

MonoProof MD-TDS

Technical Data Sheet

Download Now

MonoProof MD-MSDS

Material Safety Data Sheet

Download Now