Bituminous Waterproofing Coating For Sandwich constructions
MonoProof BWP is a ready mixed coating, brush applied bituminous, black, lead- free, acid, alkali, water and chloride resistant that cures by reaction with atmospheric moisture to form a tough but flexible waterproofing membrane.
MonoProof BWP - Acrylic polymer modified elastomeric waterproofing membrane coating for concrete and masonry surfaces
MonoProof BWP is a ready mixed coating, brush applied bituminous, black, lead- free, acid, alkali, water and chloride resistant that cures by reaction with atmospheric moisture to form a tough but flexible waterproofing membrane. They also meet the requirements for coatings suitable for use on surfaces in contact with potable water.
MonoProof BWP are based on raw materials which are amongst the most water and water-vapor resistant surface coating materials available. They are also resistant to a wide range of chemical attack. Also to protect the concrete against effects of chlorinated water, and to inhibit algae growth and facilitate easier cleaning. The excellent chemical resistance of MonoProof BWP makes it particularly suitable for sub-structure applications in areas where chemical contaminants and aggressive ground water conditions prevail.
Specially selected bitumens are blended to produce various grades, each designed to provide the best possible protective coating for its practical purpose. MonoProof BWP incorporates fibers which give body to the film and act as reinforcement in the coating, eliminating cracking and crazing under conditions of thermal movement.
Note : In common with all bituminous and tar based coatings, and many other organic materials, MonoProof BWP are susceptible to prolonged exposure to ultraviolet light and are not, therefore, recommended for use in situations where they will be exposed to direct daylight. They are however, ideally suited for use in sandwich constructions, or as surface coatings in enclosed tanks or structures, or below ground, where their durability is well proven.
Easy to use : Simple brush or trowel application
Cold applied :No heating or dangerous handling
Liquid membranes: Can be applied to rough or contoured surfaces.
No joints :Continuous unbroken film
Nontoxic: Safe with drinking water.
Thermal stability Irreversible chemical cure eliminates melting and flow at high temperature.
Crack bridging - Bridges crack up to 2 mm wide.
High chemical resistance – Excellent protection against corrosive soil conditions, resistance against saline water, mild acids and alkalis, high suphate resistance
Durability - Excellent resistance to oxidation and does not harden over the period.
Resistant to bio-deterioration
Abrasion resistant–No additional protective coating is required for roof subjected to foot traffic.
Ease of application – can be applied by brush & roller easily.
Light weight – does not add extra weight over the roof